Shared Service Specific Info Items
The Service Details View in CygNet Explorer displays service info items and their values. These service specific info items are shared between two or more services.
Browse by letter: A [C] [D] [E] [L] [M] [N] [P] Q [R] [S] [V]
| Info Item | Nice Name | Description | SVCMON UDC | Point Type | Service* | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ARS | AUD | CAS | CVS | DBS | DDS | FAC | ELS | PNT | VHS | |||||
|
AUDIT_LEVEL |
AUDIT_LEVEL |
The current audit level for messages within the service. This will be either the value of the AUDIT_LEVEL keyword from the service configuration file or a number that is higher if it has been set at runtime. This is also the keyword used to set it at runtime. Info item is not available in AUD, CAS, CVS, DDS, ELS/ELSALM, GRP, and NOTE. |
- |
AI |
|
|
|
|
||||||
|
AUDIT_LEVEL_METADATA |
AUDIT_LEVEL_METADATA |
The current audit level user modifications to any metadata changes. This will be either the value of AUDIT_LEVEL_METADATA service configuration keyword or a number that is higher if it has been set at runtime. This is also the keyword used to set it at runtime. |
- |
AI |
|
|
|
|
|
|
|
|
|
|
|
AUDIT_LEVEL_SETPOINT |
AUDIT_LEVEL_SETPOINT |
The current audit level for CVS setpoints. This will be either the value of the AUDIT_LEVEL_SETPOINT keyword from the service configuration file or a number that is higher if it has been set at runtime. This is also the keyword used to set it at runtime. |
- |
AI |
|
|
||||||||
|
AVG_RESPONSE_TIME |
Fwder avg msg resp time |
On average, the amount of time it takes for the history receiver to respond to history forwarding messages. |
SVMHSTAVR1 |
AI |
|
|
|
|||||||
|
Latest Notify Record |
A numeric value representing the ID (sequence number) of the most recent change added to the change queue. When replication is up to date, this value for the source service will match the REPL_LAST_SEQ value on the replicated service. Note: This info item is displayed on both the Replication page and the Service Specific (CAS, CVS, DBS, VHS) page. |
SVMDBSSEQC |
AI |
|
|
|
|
|
||||||
|
Change Update Queue Size |
The size of the change log that contains the incremental changes to the data in the source service. |
SVMVHSCQSZ |
AI |
|
|
|
|
|
||||||
|
CVS_CNTROL_QUEUE_CNT |
Control Queue Count |
The number of pending setpoints. |
SVMCVSCTLQ |
AI |
|
|
||||||||
|
CVS_CONFIG_QUEUE_CNT |
Config Queue Count |
The number of pending changes from the PNT. |
SVMCVSCFGQ |
AI |
|
|
||||||||
|
CVS_CURR_SEQ_NUM |
CVS Last Sequence Number |
The sequence number of the last change on the change queue. Deprecated in favor of CHANGE_QUEUE_NEWEST. |
SVMCVSSEQC |
AI |
|
|
||||||||
|
CVS_DELAYED_ALARMS |
Delayed Alarm Count |
The number of delayed alarms. |
SVMCVSDALM |
AI |
|
|
||||||||
|
Enhanced Alm Inv Points |
The number of points with invalid EAC configuration. |
SVMCVSEACB |
AI |
|
|
|||||||||
|
Enhanced Alm Point Cnt |
The number of points with EAC configuration enabled. |
SVMCVSEACP |
AI |
|
|
|||||||||
|
Enhanced Alm Proc Count |
The number of real-time value updates delayed when EAC is enabled on them. |
SVMCVSEACQ |
AI |
|
|
|||||||||
|
Force Option Explicit |
Indicates whether the forced Option Explicit for all hyperpoints in the service is set. Specifies the value of the SCRIPTING_OPTION_EXPLICIT service configuration keyword. See Using Option Explicit in HyperPoint Scripts for more information about this feature. |
- |
DI |
|
|
|||||||||
|
CVS_MAX_CHG_LOG_CNT |
CVS Max Change Log Cnt |
- |
AI |
|
|
|||||||||
|
Max Points |
The number of maximum points. Specifies the value of the MAX_POINTS service configuration keyword for each CVS. |
SVMCVSMP |
AI |
|
|
|||||||||
|
CVS_MAX_SET_QUE_CNT |
CVS Max Setpoint Queue |
The maximum number of setpoints that will be added before rejecting new setpoints. Currently set to 50,000. |
- |
AI |
|
|
||||||||
|
CVS_OLDEST_SEQ_NUM |
CVS Oldest Sequence Num |
|
SVMCVSSEQO |
AI |
|
|
||||||||
|
CVS_PENDING_ALARMS |
Pending Alarm Count |
The number of pending alarms to send to the CAS. |
SVMCVSCASQ |
AI |
|
|
||||||||
|
CVS_PENDING_NOTIFS |
Pending Notification Cnt |
The number of pending notifications to send to the GNS. |
SVMCVSGNSQ |
AI |
|
|
||||||||
|
CVS_POINT_PRCNT_FULL |
Point Percent full |
The ratio of configured and enabled points for a CVS to the MAX_POINTS service configuration keyword. That is: CVS_TOTAL_POINTS (SVMCVSTP) / CVS_MAX_POINTS (SVMCVSMP). |
SVMCVSTPPC |
AI |
|
|
||||||||
|
Script Enabled |
Indicates whether scripting is enabled for this service. Options are 0 (false) and 1 (true). Specifies the value of the ENABLE_SCRIPTING service configuration keyword. |
SVMCVSSE |
DI |
|
|
|||||||||
|
CVS_SUPPRESSED_COUNT |
Suppressed Point Count |
The number of suppressed alarms. |
SVMCVSSALM |
AI |
|
|
||||||||
|
CVS_TIME_TO_READY |
CVS time to ready |
The time for all points to become ready in the UIS after the last start. |
SVMCVSRDYT |
AI |
|
|
||||||||
|
CVS_TIMERS_DELAYED |
CVS_TIMERS_DELAYED |
The number of times an OnTimer event fires for a scripted point (HyperPoint), but is delayed because another script is running. CVS_TIMERS_DELAYED will be reset on service restart. |
- |
AI |
|
|
||||||||
|
CVS_TIMERS_FIRED |
CVS_TIMERS_FIRED |
The number of times an OnTimer event fires for a scripted point (HyperPoint). CVS_TIMERS_FIRED will be reset on service restart. |
- |
AI |
|
|
||||||||
|
CVS_TIMERS_QUEUED |
CVS_TIMERS_QUEUED |
The number of pending OnTimer events for a scripted point (HyperPoint); that is, events that have fired, but not yet run. This may occur when a long running script is still "in play". This value reverts to zero as the queued events complete. |
- |
AI |
|
|
||||||||
|
CVS_TOTAL_POINTS |
Total Points |
The total number of points. |
SVMCVSTP |
AI |
|
|
||||||||
|
DBS Data File Clean |
Indicates if DBS data file is clean. -1 is unknown, 0 is not clean, 1 is clean. |
SVMDBSDTCN |
AI |
|
|
|||||||||
|
DATA_FILE_CLEAN_TIME |
DBS Last Clean DAT time |
The last time the DBS data file was cleaned. Valid only if DATA_FILE_CLEAN is 0. |
- |
AI |
|
|
||||||||
|
DATA_FILE_SIZE |
Size of database file |
The size of database file in bytes. |
SVMDBSDTFS |
AI |
|
|
||||||||
|
DATA_FILE_TIME |
Database File Time |
The last modified time for the service’s DAT file. |
- |
AI |
|
|
||||||||
|
DATA_RECORD_COUNT |
Record count in database |
The number of records in all of the dbs .dat files. |
SVMDBSDTRC |
AI |
|
|
||||||||
|
DATA_SEQ_NUM |
Database sequence number |
The value is incremented for each write to the DAT file. Used for detecting if the database file has changed, and also the rate at which it is changing. |
SVMDBSSEQN |
AI |
|
|
||||||||
|
DATA_SPACE_AVAILABLE |
Database file spare spac |
The space available in database file. |
SVMDBSDTSS |
AI |
|
|
||||||||
|
DBS_DAT_INX_SYNCHED |
DBS Dat,Inx Files Sync’d |
Indicates if the DAT and INX file are synchronized with each other. -1 is unknown (this will happen if either NDX_FILE_CLEAN is 0 or DATA_FILE_CLEAN is 0), 0 is not in synch, 1 is in synch. |
SVMDBSDIS |
AI |
|
|
||||||||
|
DBS_DDL_SIGNATURE |
DBS data defn signature |
Indicates the signature of the DBS DDL content, used to validate that two services have structurally the same DDL. |
- |
SI |
|
|
||||||||
|
DBS_FILE_CACHE_ACTVE |
DBS file cache active |
The number of megabytes consumed by the DBS for the purpose of its data cache. Note: This info item is displayed on both the Process Performance page and the Service Specific (DBS) page. |
SVMDBSCASH |
AI |
|
|
||||||||
|
DBS file cache max |
The value of the DBS_DISK_CACHE_IN_MEGS configuration file setting. The upper limit of DBS_FILE_CACHE_ACTIVE. Note: Can be set dynamically using the SetGenserveInfo function on CxScript. Controls how well a DBS can perform. |
- |
AI |
|
|
|||||||||
|
DBS_FILE_CACHE_MIN |
DBS file cache min |
The value of the DBS_MIN_DISK_CACHE_IN_MEGS configuration file setting. Not strictly the lower limit on DBS_FILE_CACHE_ACTIVE. Controls how eager the DBS’s data cache will be to consume memory in the absence of other memory pressure in the system. Note: Can be set dynamically using the SetGenserveInfo function on CxScript. Controls how well a DBS can perform. |
- |
AI |
|
|
||||||||
|
DBS_FILE_INIT_TIME |
DBS file initialize time |
SVMDBSFITM |
AI |
|
|
|||||||||
|
DBS_MUTEX_REJECT |
DBS Mutex Reject Count |
The number of times a message was rejected because the database was busy. |
- |
AI |
|
|
||||||||
|
DBS_MUTEX_TIMEOUT |
DBS Mutex Timeout Count |
The number of times a message was delayed because the database was busy. A delayed message may end up being rejected if it is delayed twice. |
- |
AI |
|
|
||||||||
|
DBS_TIME_TO_READY |
DBS time to ready |
The time in seconds for the DBS-based service to become ready after the last start. (Time from process start to begin accepting messages.) |
SVMDBSRDTY |
AI |
|
|
||||||||
|
DBS_TRANSACTION_LCNT |
DBS Transaction Log Cnt |
The number of DBS transaction logs files. |
SVMDBSTXFC |
AI |
|
|
||||||||
|
DBS_TRANSACTION_LDIR |
TxLogs Folder |
The directory where the DBS transaction log files are stored. Specifies the value of the DBS_TRANSACTION_LOG_DIR service configuration keyword. |
LOGDIR |
AI |
|
|
||||||||
|
DDL_FILE_TIME |
DDL File Time |
The last modified time for the service’s primary DDL file. |
- |
AI |
|
|
||||||||
|
DDL Version Number |
The version number of the DBS-based service .ddl file. |
SVMDBSDDLV |
AI |
|
|
|||||||||
|
Fwder expired msg count |
The number of history forwarding messages that have not been sent to the history receiver due to expiration as configuration parameters specify. |
SVMHSTEXP1 |
AI |
|
|
|
||||||||
|
Fwder last resp time |
The amount of time it took for the history receiver to respond to the last history forwarding message. |
SVMHSTLRS1 |
AI |
|
|
|
||||||||
|
LAST_SENT_TIME |
Fwder last sent time |
The time that the last history forwarding message was sent to the history receiver. |
SVMHSTLSN1 |
SI |
|
|
|
|||||||
|
Fwder total msgs sent |
The number of total history forwarding messages sent to the history receiver. |
SVMHSTSNT1 |
AI |
|
|
|
||||||||
|
DBS Index File Clean |
Indicates if DBS index file is clean. -1 is unknown, 0 is not clean, 1 is clean. |
SVMDBSIXCN |
AI |
|
|
|||||||||
|
NDX_FILE_CLEAN_TIME |
DBS Last Clean INX time |
The last time the DBS index file was cleaned. Valid only if DATA_FILE_CLEAN is 0. |
- |
AI |
|
|
||||||||
|
NDX_FILE_SIZE |
Size of index file |
The size of index file in bytes. |
SVMDBSIXFS |
AI |
|
|
||||||||
|
NDX_FILE_TIME |
Index File Time |
The last modified time for the service’s INX file. |
- |
AI |
|
|
||||||||
|
NDX_RECORD_COUNT |
Record count in index |
The number of records in index. |
SVMDBSIXRC |
AI |
|
|
||||||||
|
NDX_SPACE_AVAILABLE |
Index file spare space |
Space available in index file. |
SVMDBSIXSS |
AI |
|
|
||||||||
|
Fwder pending msg count |
The number of pending history forwarding messages to send to the first VHS. |
SVMHSTPND1 |
AI |
|
|
|
||||||||
|
Fwder edit queue count |
The number of history changes queued for compression and forwarding to the history receiver. |
SVMHSTQED1 |
AI |
|
|
|
||||||||
|
Retention Average Time |
The average time each transaction cleanup cycle takes. |
- |
AI |
|
|
|
||||||||
|
RET_BUILD_AVG_TIME |
Retention Build Avg Time |
- |
AI |
|
|
|
||||||||
|
RET_BUILD_LAST_TIME |
Retention Build Lst Time |
- |
AI |
|
|
|
||||||||
|
RET_BUILD_MAX_TIME |
Retention Build Max Time |
- |
AI |
|
|
|
||||||||
|
RET_CLEAN_AVG_TIME |
Retention Clean Avg Time |
- |
AI |
|
|
|
||||||||
|
RET_CLEAN_LAST_TIME |
Retention Clean Lst Time |
- |
AI |
|
|
|
||||||||
|
RET_CLEAN_MAX_TIME |
Retention Clean Max Time |
- |
AI |
|
|
|
||||||||
|
RET_LAST_REMOVED |
Retention Last Removed |
- |
AI |
|
|
|
||||||||
|
RET_LAST_TIME |
Retention Last Time |
- |
AI |
|
|
|
||||||||
|
RET_MAX_TIME |
Retention Max Time |
- |
AI |
|
|
|
||||||||
|
RET_STATUS |
Retention Cleanup Status |
- |
AI |
|
|
|
||||||||
|
Setpoint User Sec Enbld |
Indicates whether setpoint audit record creation in the AUD service database is suppressed based on user ID. Options are 0 (false) and 1 (true). Specifies the value of the AUDIT_SETPOINT_USERSEC_ENABLED service configuration keyword. See Suppressing SetPoint Auditing Based on User ID for more information about this feature. |
SVMCVSSPAS |
DI |
|
|
|||||||||
|
Validation errors |
The number of background validation errors that have occurred. See Note below. |
SVMBGVALID See Note below. |
AI |
|
|
|
||||||||
| ARS | AUD | CAS | CVS | DBS | DDS | FAC | ELS | PNT | VHS | |||||
Table Notes:
- CVS includes HSS, OPCIS, SVCMON and UIS.
- DBS includes ACS, APPS, AUD, BSS, DBS, DDS, ELS, ELSALM, FAC, GNS, GRP, MSS, NOTE, PNT, and TRS.
SVMBGVALID Note:
- For the DDS, the SVMBGVALID count represents a subset of the DDS check errors.
- For the PNT, the SVMBGVALID count represents points whose GNS IDs, referenced points, table driven fields, or primary or alternate units are invalid. For the PNT, the service log lists each point that failed the first time it encounters the error. The point record will be modified to change the GnsIdEntryError, GeneralConfigError, EnhAlmConfigError, or KeyFieldEntryError field depending on which one is invalid. These fields can only be viewed via ODBC, CxPnt, CygNet Studio, and CygNet Group Grid.
